Product Catalog

Pipe Penetration Seals
BWM Pipe Penetration Seals have been designed to assist in achieving an efficient, low-cost mechanical seal between any Electrical Conduit, Concrete, Cast Iron, Steel, Copper or PVC/CPVC pipes passing through Walls, Floors, Tanks, Pipeline Casings and Vaults.  The PIPE SEAL, while being used to seal the gap in electrical conduit lines, will also act as an insulator.

The PIPE SEAL has been designed to provide a gas and watertight seal. All sizes have been tested to with stand a hydrostatic seal up to 20 psig or 40 feet of head pressure in addition to withstanding temperatures up to 250° F.

PIPE SEAL standard elastomer material is EPDM, which is suitable for temperatures ranging from - 40° F to 250° F.  EPDM is suitable for most applications in water - above ground and direct burial - and will provide the electrical insulation where cathodic protection is required.

Where the PIPE SEAL may come in contact with Hydrocarbons, Oil, Gas, Jet fuel and miscellaneous solvents, a Nitrile material is available with temperatures ranging from
-40° F to 210° F.

The PIPE SEAL utilizes glass-reinforced plastic for the pressure plates and all hardware is manufactured from Steel Zinc Dichromate.  For extremely corrosive environments, Stainless Steel hardware is available upon request.

The BWM Company's PIPE SEAL is made from synthetic rubber with heavy duty plastic pressure plates, which are resistant to sunlight and ozone.  All bolts and nuts are plated with an anti corrosive coating. Stainless steel nuts and bolts are also available.

The BWM Company's PIPE SEAL forms a mechanical rubber seal between pipes going through walls, floors, vaults, tanks, and pipeline casings and makes a watertight seal between a pipe and a wall hole. The BWM Company's PIPE SEAL can also be used to seal a gap between an inner pipe and an outer pipe sleeve or pipeline casing. BWM Company's PIPE SEAL also will seal the gap between the electrical conduit and the outer conduit, or between the electrical conduit and the wall hole it passes through.